INSPECTION PROCEDURE 1. INSPECT BRAKE CYLINDER AND PISTON (a) Check the rear disc brake cylinder bore and rear disc brake piston for rust and scoring. If necessary, replace the rear disc brake cylinder and rear disc brake piston. 2. INSPECT PAD LINING THICKNESS
3. INSPECT REAR DISC BRAKE PAD SUPPORT PLATE (a) Make sure that the rear disc brake pad support plates have sufficient rebound, no deformation, cracks or wear, and that all rust and dirt is cleaned off. If necessary, replace the rear disc brake pad support plates. 4. INSPECT DISC THICKNESS
5. INSPECT DISC RUNOUT (a) Inspect the rear axle hub bearing looseness and rear axle hub runout. Click here (b) Temporarily install the rear disc with the 5 hub nuts. Torque: 103 N·m {1050 kgf·cm, 76 ft·lbf}
(d) Remove the 5 hub nuts and rear disc. |
Toyota Avalon Service & Repair Manual > Panoramic View Monitor System(for Hv Model): Back Camera Internal Circuit (C2A63)
DESCRIPTION This DTC is stored when the parking assist ECU detects a signal indicating a malfunction in the television camera assembly via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from C2A63 Back Camera Internal Circuit A signal indicating a malfuncti ...