Toyota Avalon Service & Repair Manual: Skid Control ECU Malfunction (C1300)

DESCRIPTION

The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1300

Skid Control ECU Malfunction

Internal failure of the skid control ECU (brake actuator assembly).

Skid control ECU (brake actuator assembly)

PROCEDURE

1.

REPLACE BRAKE ACTUATOR ASSEMBLY

(a) Replace the skid control ECU (brake actuator assembly).

Click here

HINT:

This DTC is output when the skid control ECU (brake actuator assembly) detects a malfunction in an internal circuit.

(b) Enter the following menus: Chassis / ABS/VSC/TRAC/EPB / Utility / Test Mode.

(c) Perform system variant learning and acceleration sensor zero point calibration.

Click here

Chassis > ABS/VSC/TRAC/EPB > Utility

Tester Display

Test Mode

(d) Enter the following menus: Chassis / ABS/VSC/TRAC/EPB / Utility / Signal Check.

(e) Perform the sensor check using the Test Mode (Signal Check) procedure.

Click here

Chassis > ABS/VSC/TRAC/EPB > Utility

Tester Display

Signal Check

NEXT

END

    Error in Matching of ECUs (C1288)

    Open Circuit in Right Front Speed Sensor Circuit (C1330-C1467)

    See More:

    Toyota Avalon Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): Open in Stop Switch Circuit (C1425,P0573)
    DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) detects the brake operating conditions through a signal transmitted by the stop light switch assembly. The skid control ECU incorporates a circuit to detect an open circuit. This DTC is output when an open circuit is dete ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0151