Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

PROCEDURE

1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

(a) Align the alignment mark on the rear door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip.

*a	Alignment Mark
	Flange Position

NOTICE:

• Make sure to align the alignment mark with the flange when installing the weatherstrip. If the alignment mark is not aligned, water ingress may occur.
• After installation, check that the corners fit correctly.

HINT:

• Make sure to install the part of the rear door opening trim weatherstrip near the alignment mark first.
• The color of the alignment marks on the rear door opening trim weatherstrip LH and rear door opening trim weatherstrip RH are different.

  Alignment Mark:

  Location	Color
  for LH Side	Silver
  for RH Side	Orange

2. INSTALL REAR DOOR SCUFF PLATE (for Gasoline Model)

Click here

3. INSTALL REAR DOOR SCUFF PLATE (for HV Model)

Click here

4. INSTALL REAR SEAT CUSHION LOCK HOOK (for Gasoline Model)

Click here

5. INSTALL REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)

Click here

6. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Gasoline Model)

Click here

7. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (for Gasoline Model)

w/ Seat Heater System:

Click here

8. INSTALL SPARE WHEEL COVER ASSEMBLY (for Gasoline Model)

w/ Seat Heater System:

Click here