INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY (a) Engage the grommet. (b) Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.
(c) Install the rear combination light assembly with the 2 screws. (d) Remove the protective tape. (e) Engage the clamp. (f) Connect the connector. 2. INSTALL REAR COMBINATION LIGHT COVER (a) Engage the 5 claws to install the rear combination light cover as shown in the illustration.
3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH (for LH Side) Click here 4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH (for RH Side) Click here 5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for RH Side) for HV Model: Click here 6. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD Click here 7. INSTALL REAR FLOOR FINISH PLATE Click here 8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Click here 9. INSTALL BAGGAGE HOLDER NET Click here 10. INSTALL SPARE WHEEL COVER ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: System Voltage (BATT) Circuit Short to Ground or Open (P056014)
DESCRIPTION Auxiliary battery power is supplied to the BATT terminal of the hybrid vehicle control ECU in order to store DTCs and freeze frame data. Even if the power switch is turned off, back-up power is supplied. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P05 ...