Toyota Avalon Service & Repair Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC AND FREEZE FRAME DATA (USING TECHSTREAM)

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Enter the following menus: Chassis / Electric Parking Brake / Trouble Codes.

Chassis > Electric Parking Brake > Trouble Codes

(f) Check for DTCs.

(g) Check the freeze frame data.

  1. If DTCs are output, check the freeze frame data and read the vehicle status when the DTC was stored.

HINT:

for Freeze Frame Data: Click here

CLEAR DTC AND FREEZE FRAME DATA (USING TECHSTREAM)

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Enter the following menus: Chassis / Electric Parking Brake / Trouble Codes.

(f) Clear the DTCs.

Chassis > Electric Parking Brake > Clear DTCs

HINT:

When DTCs are cleared, the freeze frame data will also be cleared.

    Diagnostic Trouble Code Chart

    Electric Parking Brake does not Operate

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Intake Air Temperature Sensor 1 Bank 1 Circuit Short to Battery or Open (P011015)
    DESCRIPTION Refer to DTC P011011. Click here HINT: When DTC P011015 is stored, the ECM enters fail-safe mode. During fail-safe mode, the intake air temperature is estimated to be 20°C (68°F) by the ECM. Fail-safe mode continues until a pass condition is detected, and the engine switch is then turn ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0158