Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click here

(a) Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.

NOTICE:

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.

(b) Install the engine coolant temperature sensor to the water outlet with the clip.

NOTICE:

  • If the engine coolant temperature sensor has been struck or dropped, replace it.
  • Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Click here

3. ADD ENGINE COOLANT

Click here

4. INSPECT FOR COOLANT LEAK

Click here

5. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click here

    Inspection

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Engine Coolant Pump Overspeed (P26CE37)
    DESCRIPTION Refer to DTC P26CA12. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P26CE37 Engine Coolant Pump Overspeed The speed of the water inlet housing with water pump sub-assembly is a certain value or more when an operation request signal is being output ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0168