INSTALLATION PROCEDURE 1. INSTALL STARTER ASSEMBLY (a) Install the starter assembly with the 2 bolts. Torque: 46 N·m {469 kgf·cm, 34 ft·lbf} (b) Connect the engine wire to the terminal 30 with the nut. Torque: 9.8 N·m {100 kgf·cm, 87 in·lbf} (c) Close the terminal cap. (d) Connect the starter assembly connector. 2. INSTALL BATTERY CLAMP SUB-ASSEMBLY Click here 3. INSTALL ECM Click here 4. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE Click here 5. INSTALL INLET AIR CLEANER ASSEMBLY Click here 6. INSTALL V-BANK COVER SUB-ASSEMBLY Click here 7. INSTALL COOL AIR INTAKE DUCT SEAL Click here 8. INSTALL BATTERY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Panoramic View Monitor Switch: Inspection
INSPECTION PROCEDURE 1. INSPECT PANORAMIC VIEW MONITOR SWITCH (a) Remove the panoramic view monitor switch Click here (b) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified Condition 5 (D) - 2 (E) Panoramic view moni ...