Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 5

Pressed (On)

Below 25 Ω

2 - 5

Not pressed (Off)

1 MΩ or higher

If the result is not as specified, replace the luggage compartment door opening switch assembly.

*a

Component without harness connected

(Luggage Compartment Door Opening Switch Assembly)

(b) Check the switch illumination.

(1) Apply auxiliary battery voltage to the switch connector and check that the luggage compartment door opening switch assembly illuminates.

OK:

Auxiliary Battery Connection

Specified Condition

Auxiliary battery positive (+) → Terminal 6

Auxiliary battery negative (-) → Terminal 1

Illumination illuminates

If the result is not as specified, replace the luggage compartment door opening switch assembly.

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Engine Unit: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL CYLINDER BLOCK WATER JACKET SPACER (a) Install the cylinder block water jacket spacer and cylinder block water jacket spacer LH to the cylinder block sub-assembly. NOTICE: Firmly press the cylinder block water jacket spacer into the cylinder block sub-assembly and con ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0148