ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLER CONDENSER ASSEMBLY (a) If the cooler condenser assembly fins are dirty, clean them with water and dry them with compressed air. NOTICE: Do not damage the cooler condenser assembly fins. (b) If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers. 2. INSPECT FOR REFRIGERANT LEAK (a) Using a halogen leak detector, check the pipe joints for refrigerant leaks. (b) If a refrigerant leak is detected in a joint, check the torque of the bolt of the joint. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electric Parking Brake Switch: Inspection
INSPECTION PROCEDURE 1. INSPECT ELECTRIC PARKING BRAKE SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 9 (SWI1) - 10 (SWO1) OFF (Rel ...