Toyota Avalon Service & Repair Manual: Driving Support ECU (C1A01)

DESCRIPTION

The driving support ECU assembly uses the millimeter wave radar sensor assembly to detect objects in front of the vehicle.

Based on signals from the millimeter wave radar sensor assembly, the driving support ECU assembly calculates the possibility of a collision and operates the pre-collision system if it determines that the possibility is high.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A01

Driving Support ECU

When the engine switch is on (IG), the driving support ECU assembly detects an internal malfunction for approximately 1 second.

Driving support ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.

PROCEDURE

1.

REPLACE DRIVING SUPPORT ECU ASSEMBLY

(a) Replace the driving support ECU assembly.

Click here

NEXT

END

    Front Radar Sensor Region Code Mismatch (C1A0A)

    Vehicle Information Not Obtained (C1A02)

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Battery or Open (P012015)
    DESCRIPTION Refer to DTC P012011. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P012015 Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Battery or Open The output voltage of VTA1 is higher than 4.535 V for 2 seconds or more (1 trip detection lo ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2023 Copyright www.tavalon.net
    0.0153