DESCRIPTION If the red and green indicators fail to illuminate after the engine switch is turned on (IG), the vehicle does not recognize the DCM (Telematics Transceiver). The DCM (Telematics Transceiver) connectors may have been disconnected or the DCM (Telematics Transceiver) is malfunctioning. PROCEDURE
(a) Turn the engine switch off. (b) Connect the Techstream to the DLC3. (c) Turn the engine switch on (IG) and wait for 10 seconds. (d) Turn the Techstream on. (e) Perform "Health Check" using the Techstream and check that Telematics (Safety Connect) is listed on "Health Check Result". Click here
(a) Turn the engine switch off. (b) Connect the Techstream to the DLC3. (c) Turn the engine switch on (IG) and wait for 10 seconds. (d) Turn the Techstream on. (e) Check current DTCs and history DTCs. Click here
|
Toyota Avalon Service & Repair Manual > Hybrid Transaxle Fluid: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH Click here 2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH Click here 3. REMOVE NO. 1 ENGINE UNDER COVER Click here 4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY Click here 5. INSPECT HYBRID TRANSAXLE FLUID (a) Using a 10 mm ...
