Toyota Avalon Service & Repair Manual: Red Indicator Remains On

DESCRIPTION

This means that the DCM (Telematics Transceiver) has detected a malfunction in the safety connect system and stored a DTC.

PROCEDURE

1.

CHECK DTC

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the engine switch on (IG) and wait for 10 seconds.

(d) Turn the Techstream on.

(e) Perform "Health Check" and check for current DTCs.

Click here

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A

2.

REPLACE DCM (TELEMATICS TRANSCEIVER)

(a) Replace the DCM (Telematics Transceiver).

Click here

NOTICE:

  • The engine switch must be off.
  • Do not swap the DCM (Telematics Transceiver) with one from another vehicle.
NEXT

PERFORM DCM ACTIVATION

    Problem Symptoms Table

    System Description

    See More:

    Toyota Avalon Service & Repair Manual > Electrical Key Oscillator(for Rear Floor): Components
    COMPONENTS ILLUSTRATION *A for HV Model - - *1 LUGGAGE TRIM SERVICE HOLE COVER - - ILLUSTRATION *1 SPARE WHEEL COVER ASSEMBLY - - ILLUSTRATION *A for HV Model *B for Gasoline Model *C w/ Seat Heater System - - *1 LUGGAGE COMPARTMENT INNER TRIM PAD *2 NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY *3 R ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2023 Copyright www.tavalon.net
    0.0131