DIAGNOSIS SYSTEM DESCRIPTION (a) The DCM (Telematics Transceiver) control the vehicle safety connect system functions. Safety connect system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). In some cases, a malfunction may be occurring in the safety connect system. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs. CHECK DLC3 (a) Check the DLC3. Click here INSPECT AUXILIARY BATTERY VOLTAGE (a) Measure the battery voltage with the power switch off. Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the auxiliary battery. CHECK INDICATOR (a) When a malfunction is detected in the safety connect system, the manual (SOS) switch red indicator on the manual (SOS) switch illuminates to inform the driver of the malfunction. Click here
|
Toyota Avalon Service & Repair Manual > Adaptive Variable Suspension System: Test Mode Procedure
TEST MODE PROCEDURE TEST MODE PROCEDURE NOTICE: After replacing the absorber control ECU, it is necessary to perform registration of vehicle identification information. Vehicle identification information is automatically acquired when the system enters test mode. HINT: When entering test mode, the a ...
