Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL OCCUPANT DETECTION ECU

(a) Engage the claw to install the occupant detection ECU.

NOTICE:

If the occupant detection ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant detection ECU with a new one.

(b) Connect the 2 connectors.

NOTICE:

When installing the occupant detection ECU, be careful that the SRS wiring does not interfere with or is not pinched between other parts.

2. INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click here

3. PERFORM DIAGNOSTIC SYSTEM CHECK

for Gasoline Model: Click here

for HV Model: Click here

4. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK

for Gasoline Model: Click here

for HV Model: Click here

    Components

    On-vehicle Inspection

    See More:

    Toyota Avalon Service & Repair Manual > Knock Sensor: Components
    COMPONENTS ILLUSTRATION *1 KNOCK CONTROL SENSOR - - N*m (kgf*cm, ft.*lbf): Specified torque - - ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0169