Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: CAN Communication Failure (Message Registry) (U1000)

DESCRIPTION

If DTC U1000 is stored frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again even if the DTC is not output when rechecking for DTCs.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U1000

CAN Communication Failure (Message Registry)

ECU malfunction

Clearance warning ECU assembly

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs.

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs

(b) Check for DTCs.

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes

OK:

DTC U1000 is not output.

HINT:

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.

Click here

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE CLEARANCE WARNING ECU ASSEMBLY

    Control Module Communication Bus "A" Off (U0073,U0155)

    Panoramic View Monitor Switch

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Vacuum Warning Switch(for Gasoline Model): On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT BRAKE FLUID LEVEL IN RESERVOIR Click here 2. INSPECT BRAKE BOOSTER ASSEMBLY Click here 3. INSPECT VACUUM WARNING SWITCH ASSEMBLY (a) Start the engine and stop it after 1 or 2 minutes. (b) Remove the battery. Click here (c) Disconnect the connector from the ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0116