Toyota Avalon Service & Repair Manual: Lost Communication with Panoramic View Monitor Control Module (U023B)

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the television camera assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

U023B

Lost Communication with Panoramic View Monitor Control Module

Lost Communication with parking assist ECU

CAN communication system

Television camera assembly

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

HINT:

  • If CAN communication system DTCs are stored, they may also be stored in other systems.
  • If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
  • If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.

    Click here

Result

Proceed to

DTCs are output

A

No DTCs are output

B

A

GO TO CAN COMMUNICATION SYSTEM

B

USE SIMULATION METHOD TO CHECK

    Terminals Of Ecu

    Control Module Communication Bus Off (U0073,U0265,U1110)

    See More:

    Toyota Avalon Service & Repair Manual > Steering Gear(for Hv Model): Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL NO. 2 STEERING RACK BOOT (a) Apply lithium soap base glycol grease to the inside of the small opening of a new No. 2 steering rack boot. Lithium Soap Base Glycol Grease (b) Install the No. 2 steering rack boot to the groove on the rack housing. NOTICE: Be careful not ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2023 Copyright www.tavalon.net
    0.0147