PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Bus Check. Click here (e) Check that all ECUs and sensors that use CAN communication are connected.
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Health Check. (e) Check for DTCs.
(a) Check that each system related to Toyota Entune Remote Connect operates normally. (1) Check power door lock control system Click here
(2) Check smart key system (for Entry Function) Click here (3) Check smart key system (for Start Function) Click here (4) Check theft deterrent system Click here (5) Check lighting system (INT) Click here (6) Check meter/gauge system Click here (7) Check air conditioning system (for Automatic Air Conditioning System) Click here (8) Check power window control system Click here (9) Check sliding roof system Click here (10) Check lighting system (EXT) Click here
(a) Check DCM Operation History. Body Electrical > Telematics > Utility
|
Toyota Avalon Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Brake Signal Malfunction (B2284)
DESCRIPTION This DTC is stored when the brake signal sent via direct line and the brake signal sent via CAN communication do not match. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2284 Brake Signal Malfunction The brake signal sent via direct line and the brake signal sent via ...