INSTALLATION PROCEDURE 1. INSTALL NO. 1 SWITCH WIRE HINT: Perform this procedure only when replacement of the No. 1 switch wire is necessary. (a) Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly. 2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (a) Connect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to install the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly to the No. 1 switch wire. (b) Engage the 2 clamps. (c) Engage the 4 claws to install the shift paddle switch (transmission shift switch assembly) to the steering wheel assembly. (d) Install 2 new screws. Torque: 1.7 N·m {17 kgf·cm, 15 in·lbf} 3. INSTALL STEERING PAD SWITCH ASSEMBLY Click here 4. INSTALL STEERING WHEEL ASSEMBLY Click here |
Toyota Avalon Service & Repair Manual > Occupant Classification System(for Gasoline Model): Rear Occupant Classification Sensor LH Collision Detection (B1787)
DESCRIPTION DTC B1787 is stored when the occupant detection ECU receives a collision detection signal sent by the rear occupant classification sensor LH in the case of an accident. DTC B1787 is also stored when the front seat assembly RH is subjected to a strong impact, even if an actual accident di ...