INSTALLATION PROCEDURE 1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (a) Install the luggage door lock control cable sub-assembly. 2. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (a) Connect the cable. (b) Engage the 2 claws to install the luggage compartment door inside handle. (c) Engage the claw as shown in the illustration.
3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (a) Apply MP grease to the sliding parts of the luggage compartment door lock assembly. (b) Install the luggage compartment door lock assembly with the 2 bolts. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf} (c) Connect the luggage door lock control cable sub-assembly to the luggage compartment door lock cylinder assembly. (d) Engage the clamp. (e) Connect the connector. 4. INSTALL LUGGAGE COMPARTMENT DOOR COVER Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Heating / Air Conditioning: Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT MG CLT RELAY (for 2GR-FKS) *a MG CLT Relay (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 Battery voltage applied between terminal 1 a ...