DTC CHECK / CLEAR CHECK FOR DTC (METER / GAUGE SYSTEM) (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Combination Meter / Trouble Codes. Body Electrical > Combination Meter > Trouble Codes(e) Check for DTCs. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Combination Meter / Clear DTCs. Body Electrical > Combination Meter > Trouble Codes(e) Clear the DTCs. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Valve Body Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT SOLENOID (SL) VALVE (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition Solenoid (SL) valve connector terminal - Solenoid (SL) valve body 20°C (68°F) 11 to 15 Ω If the result ...
