Toyota Avalon Service & Repair Manual: ECU Malfunction (C1614)

Toyota Avalon Service & Repair Manual / Audio, Visual, Telematics / Park Assist / Monitoring / Panoramic View Monitor System(for Gasoline Model) / ECU Malfunction (C1614)

DESCRIPTION

This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check.

HINT:

The parking assist ECU stores different types of information during initialization. If the parking assist ECU cannot read the stored information when activated, the parking assist ECU judges that there is an internal malfunction and stores this DTC.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	DTC Output from
C1614	ECU Malfunction	Power source malfunction Main CPU start malfunction Main CPU reset detected Main CPU regular monitoring malfunction CAN CPU start malfunction System standby malfunction Main EEPROM malfunction Sub EEPROM malfunction ECU internal display line malfunction	Parking assist ECU	Parking assist ECU

CAUTION / NOTICE / HINT

NOTICE:

When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.
Click here
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
Click here

PROCEDURE

1.	READ VALUE USING TECHSTREAM (PARKING ASSIST ECU STATUS)

(a) Use the Data List to check if the parking assist ECU status is functioning properly.

Click here

Chassis > Panoramic View Monitor > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Main CPU Forced Termination Detection Record	A history item indicating that the main CPU did not enter standby status within 15 seconds of turning the engine switch off and a forced end was applied	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
Main CPU Abnormal Response Record	A history item indicating that the main CPU became unresponsive in normal status	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
Main CPU Abnormal Reset Record	A history item indicating that the main CPU was reset, although the engine switch was not turned off in normal status	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
Image Processing IC Written Protect Record	A history item indicating that the image processing IC memory was write protected	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
Image Processing IC Initialized Malfunction Record	A history item indicating that the image processing IC memory was not initialized	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
Main EEPROM Access Status	Main EEPROM access status	Normal/Abnormal	Normal: Parking assist ECU is normal Abnormal: Parking assist ECU is abnormal	-
Sub EEPROM Access Status	Sub-EEPROM access status	Normal/Abnormal	Normal: Parking assist ECU is normal Abnormal: Parking assist ECU is abnormal	-
System Power Supply Voltage Malfunction Record	A history item indicating an abnormal generated-voltage value from the system power source	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
Main CPU Starting Malfunction Record	A history item indicating that the main CPU did not start	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-
CAN CPU Boot Malfunction Record	A history item indicating that the CPU controlling the input and output of the information obtained via CAN communication did not start and the information could not be retrieved	No/Yes	No: Parking assist ECU is normal Yes: Parking assist ECU is abnormal	-

Chassis > Panoramic View Monitor > Data List

Tester Display
Main CPU Forced Termination Detection Record
Main CPU Abnormal Response Record
Main CPU Abnormal Reset Record
Image Processing IC Written Protect Record
Image Processing IC Initialized Malfunction Record
Main EEPROM Access Status
Sub EEPROM Access Status
System Power Supply Voltage Malfunction Record
Main CPU Starting Malfunction Record
CAN CPU Boot Malfunction Record

Result	Proceed to
OK is displayed for all items	A
NG is displayed	B

USE SIMULATION METHOD TO CHECK

2.	CHECK FOR DTC

(a) Clear the DTCs.

Chassis > Panoramic View Monitor > Clear DTCs

(b) Check for DTCs.

Chassis > Panoramic View Monitor > Trouble Codes

OK:

DTC C1614 is not output.

HINT:

If DTC C1614 is output, perform the procedure to allow the parking assist ECU to store the vehicle information again.
If DTC C1614 is still output after performing the procedure to make the parking assist ECU store the vehicle information 3 times, replace the parking assist ECU.
If DTC C1614 is output frequently, replace the parking assist ECU even though the DTC is not output when rechecking for DTCs.

END

REPLACE PARKING ASSIST ECU

ECU Malfunction (C1611)

Back Camera Power Supply Failure (C1621)

See More:

Toyota Avalon Service & Repair Manual > Smart Key System(for Entry Function, Gasoline Model): Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. When using the Techstream with the engine switch off, connect the Techstream to ...

Toyota Avalon Service & Repair Manual: ECU Malfunction (C1614)

ECU Malfunction (C1611)

Back Camera Power Supply Failure (C1621)

See More:

Toyota Avalon Owners Manual

Toyota Avalon Service & Repair Manual