Toyota Avalon Service & Repair Manual: BSM Buzzer Sound Request Signal Malfunction (C2A5C)

DESCRIPTION

This DTC is stored when the television camera assembly receives an invalid communication signal from the blind spot monitor sensor RH.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

C2A5C

BSM Buzzer Sound Request Signal Malfunction

An invalid communication signal is received from the blind spot monitor sensor RH

Television camera assembly

Television camera assembly

CAUTION / NOTICE / HINT

NOTICE:

  • When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

    Click here

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

Result

Proceed to

DTC C2A5C is output

A

DTC C2A5C is not output

B

A

REPLACE TELEVISION CAMERA ASSEMBLY

B

END

    "CHK" message(s) are displayed on the SIGNAL CHECK screen.

    BSM Buzzer Malfunction (C2A5D)

    See More:

    Toyota Avalon Service & Repair Manual > Seat Position Sensor: Installation
    INSTALLATION PROCEDURE 1. INSTALL SEAT POSITION AIRBAG SENSOR (a) Engage the pin to install the seat position airbag sensor to the seat slide position sensor protector as shown in the illustration. Install in this Direction (b) Using a 1.3 mm (0.0512 in.) feeler gauge, temporarily install the seat p ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0122