Toyota Avalon Service & Repair Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the rear center seat outer belt assembly.

PROCEDURE

1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)

(a) Visually check for defects with the rear center seat outer belt assembly installed to the vehicle.

(1) The defects to be checked are as follows:

  • Cuts on the rear center seat outer belt assembly
  • Small cracks on the rear center seat outer belt assembly
  • Significant discoloration on the rear center seat outer belt assembly

OK:

No defects are found.

HINT:

If any defects are found, replace the rear center seat outer belt assembly with a new one.

2. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)

(a) Visually check for defects with the rear center seat outer belt assembly removed from the vehicle.

(1) The defects to be checked are as follows:

  • Cuts on the rear center seat outer belt assembly
  • Small cracks on the rear center seat outer belt assembly
  • Significant discoloration on the rear center seat outer belt assembly
  • Cracks or other damage on the connector

OK:

No defects are found.

HINT:

If any defects are found, replace the rear center seat outer belt assembly with a new one.

    Installation

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Air Fuel Ratio Sensor(for Sensor 1): Inspection
    INSPECTION PROCEDURE 1. INSPECT AIR FUEL RATIO SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω 1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher If the result ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0259